top of page

Spindles

1964-72 A-body

 2" Drop Spindles                                                #11009300

 

 

The RideTech spindle is a heavy duty forging that is approx. 1.75" taller [balljoint to balljoint] than the OEM spindle. This basic geometry change increases the camber gain during suspension compression [allows the tire to lean into the turn instead of away from the turn]. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle.

We have personally used this spindle on our own track cars with great success over the last 4 years. We have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is compatible only with aftermarket tubular control arms like our RideTech StrongArms.

$350.00 pr.

Compatible With:

 

    67-69 Camaro

     Strong Arms

 

 

     64-67 A-body

      StrongArms

 

LINK TO ARMS

    68-72 A-body

     StrongArms

 

LINK TO ARMS

     68-74 Nova

     StrongArms

LINK TO ARMS
bottom of page